It is the use of tides or wind to deliver our daily energy needs that form ‘Green Energy’. When ‘Green’, they are all thought to be replenishable and natural. It’s interesting to note that in some instances we’re actually travelling back in time to utilise some of the older energy skill sets e.g. Wind Power (Windmills etc.) Overall, this is the method of using modern techniques to provide eco-efficiency and planet friendly options.

It is the use of simple renewable energies such as Solar Thermal and Solar Water Heating Collectors, that suits the home environment. It is equipment such as Photovoltaic Panels (PV’s) that develop electricity through suitable roof-panels. Biomass Energy is the next phase, and this involves Fuel, Pellets, Stoves and Boilers burning Wood. Of course, then there is the heating from the Sun – often just called Ground Source Heat Pumps. When we think about Wind Power and Hydropower we have two of the more common forms of energy generation.

Solar Energy Systems: Often called Solar Energy, this is fact based on two types of solar panels each using different ideas to get their results. Initially, there is the process of obtaining hot water from the Sun via Solar Water Heating Collectors. Additionally, there is the method of converting solar radiation into electricity known as Photovoltaic – or simply Solar Electrical panels. Solar Panels themselves need to be away from all light blocks, and should be on south facing roofs at angles of 30 degrees from the horizontal plane.

For the UK, this is often considered the most popular form of ‘Green Energy’. Solar Water heating systems can meet the need for more than half of all hot water needs in the domestic market. Getting a professional fitting will cost around 2-5k, however, doing the job yourself could make it as low as 500 to 1500 pounds in total.

Biomass Energy: This term encompasses all forms of natural products – such as plant and animal material. Considering its ability to produce energy in the form of heat and electricity, this type of energy is extremely flexible. Furthermore, within the European Markets, the UK is one of the central producers of Biomass fuels. One of the main factors of this style of energy is the result without the impact on C02. To that end, many wood crops come from sustainable sources (as one tree is felled, another is planted in its place; thus the new tree absorbs the CO2 produced during the heating process.)

By the growth of Short Rotation Crops (SRC), the UK is able to maximise the ‘Energy Crops’ return overall. Of equal importance is the ability to produce dry matter – and perennial grasses are very good for this. Of equal importance, although maybe less well known, are Municipal and Agricultural Waste. One natural offshoot of agricultural work is Agricultural Waste. Because it comes from food or wood, Municipal Waste is also considered a useful biomass product.

Systems Based On Geo-Thermal Energy: By naturally heating the Earth, the Sun has the potential to generate both warm water and electricity. Using the ground temperature of around 12 degrees in the UK – we can both heat and cool buildings. These heat pumps do need some power to operate; but for every one unit of energy they use, they generate four units of energy in return. This system can go even further – if energy efficient items such as wind turbines or solar electrical panels are used.

Wind Energy Programs: In use for milling grain or pumping water, wind energy has been with us for a very long time, although its modern uses are complex. However, in more recent times there’s been the option to recover the energy for its own sake – and deliver this either to a home unit or to the local power grid. The UK is considered as one of the best sources of wind generation within Europe. Potentially, we can produce 10 percent of our annual energy needs through wind power, although at present within the UK we still only use 1 percent. Frankly, electricity can be realised from as little as 2p per kWh – as opposed to the current level of 2-10 p per kWh. Recovery of the cost involved is somewhere between 6-9 months.

Then there is Hydropower – something within Europe that the UK excels in. Although new in its approach, the act of harnessing energy from water has been going on for a long time. In total, this could produce something like 2 percent of all electricity required in the UK.

The Hydropower process uses a turbine that can convert the energy from one form into another. It is by either water ‘drop-offs’, or Natural River runs, that turbines can work through this process. ‘Micro-Hydro’ utilises a chunk of the outdated sluices and dam systems that have been killed off by the large national distribution methods. Whilst considered a smaller form of electrical output, this system is thought to be able to give some 200mW of capacity to the UK. Between 200 pounds and 3k per KW of energy output, is a good estimate of the overall cost of a project such as this.

Because of the energy need of the Western World, we are now seeing a rapid rise in ‘Green Energy’. The UK is very well placed to provide most of the schemes set out above, and the UK domestic market again is one of the key beneficiaries of this technology.

Electrician and Plumbers are thought to be key in providing expertise during domestic installations. It is the political view of this type of energy generation that results in grants and financial aid becoming ever-more prevalent. Gaining installation certification across these areas can only provide further opportunity and job security to anyone already in related fields or looking to retrain. To cover both ends, you could consider electrical or plumbing training along with green systems.

Copyright 2009 Scott Edwards. Go to Renewable Energy Certification or Green Engineer Certification.